HP XP20000XP24000 Disk Array - Manual (Page 85)

Table 17 Conditions to Enable Available Button
Relationship between Mounted Capacity of Disk Drives
and Licensed Capacity
Availability of the Available Button
Mounted capacity ≤ Licensed capacity Available
Mounted capacity > Licensed capacity Not available
To install Remote Web Console options automatically on the Remote Web Console using the Available
button:
1. Log in to the Remote Web Console and open the License Key window
(“ License Key Window ” on page 50).
2. Change to Modify mode.
3. From Mode, click Available.
4. Click Install.
In the License Key list, the row of the options that can be enabled changes to blue bold italics
and the Status column changes to Install .
5. Click Apply (or Cancel).
The status of the enabled options changes to Installed.
Enabling or Disabling a License
When you want to enable or disable the term key, you select enable or disable for the License Status.
You can also enable licenses when you install more than one program product option at once; however,
some program product options are not available because their requirements are not satisfied. In this
case, you need to satisfy the requirements first, and then enable the license.
To enable or disable a license:
1. Log in to the Remote Web Console and open the License Key window
(“ License Key Window ” on page 50).
2. Change to Modify mode (see “ Changing Between View Mode and Modify Mode ” on page 40
if you need instructions).
3. Select the option that you want to set from the list.
4. Select Enable or Disable in License Status.
5. Click Set.
The row of the selected option changes to blue bold italics . If you set to disable, the Status
column changes to Install (Disable) . If you set to enable, the Status column changes to Install .
6. When you want to enable or disable other options, repeat steps 3 through 5 .
7. Click Apply (or Cancel).
The status of the program product options is changed.
Disabling Remote Web Console Options
To disable Remote Web Console options on the Remote Web Console:
1. Log in to the Remote Web Console and open the License Key window
(“ License Key Window ” on page 50).
2. Change to Modify mode.
3. Select the desired option that you want to uninstall in the list.
The selected option is displayed in reverse video.
4. From Mode, click Key Code.
5. Click Uninstall. A confirmation message is displayed.
6. Click OK (or Cancel). The row of the selected option changes to blue bold italics and also
changes the displayed status to Uninstall .
7. When you want to disable other options, repeat steps 3 through 6 .
XP24000 Remote Web Console User’s Guide 85