Changing user passwords, 42 the new user dialog box – HP XP20000XP24000 Disk Array User Manual
Page 87
2.
Change to Modify mode (see “
Changing Between View Mode and Modify Mode
3.
In the Account Information tree, select the folder to which you want to register a user account.
To register a user account as a storage administrator, select the SA folder. To register a user
account as a storage partition administrator, select the folder of SLPR No. to which you want to
register the user account.
4.
Right-click the folder to which you want to register a user account. Then, click the New User
command.
The New User dialog box (see
on page 87) is displayed.
5.
In the New User dialog box, register the following items.
• User ID: Enter the user ID of the user account that you want to register.
• Password: Enter the password to be used to log in to Remote Web Console.
• Re-enter Password: Enter the password again for confirmation.
6.
Click Set on the New User dialog box.
The New User dialog box is closed, and the icon
and a user ID for the registered user
account are displayed in the Account Information tree.
• To change the password for a registered user account, select a user ID in the Account
Information tree, and right-click to perform the Change Password command.
• To delete the registered user account, select a user ID in the Account Information tree, and
right-click to perform the Delete User command.
7.
In the Account Information tree, select the user ID of the registered user account.
8.
Set the authority of the Account Administrator Role, Audit Log Administrator Role, and Storage
Administrator Role by selecting from their each drop-down list.
9.
Set the operation authority of each function in the Permission Information list if Enable is set
for the Storage Administrator Role.
To set the operation authority of each function:
a.
Select the row for which you want to set operation authority. You can select multiple rows
by using the Shift key or Ctrl key.
b.
Select the operation authority (View or Modify) by right-clicking. The selected authority is
displayed in the Permission column.
10.
To register multiple user accounts at one time, repeat steps 3 through 9.
1 1.
Click Apply.
The settings are applied to the storage system.
Figure 42 The New User Dialog Box
Changing User Passwords
All users can change the passwords of their own user accounts. To change the user accounts of others,
log in with a user account of for which Modify is set for the Account Administrator Role.
For setting passwords, you can use all the alphanumeric characters (ASCII codes). Passwords must be
6 to 256 characters.
To change the password of a user account:
1.
Log in to Remote Web Console, and open the Account window (see
XP24000 Remote Web Console User’s Guide
87