Adding a tdef to systems insight manager, Removing a tdef from systems insight manager, Adding – HP Systems Insight Manager User Manual
Page 75: A tdef to systems insight manager
Adding a TDEF to Systems Insight Manager
After you create a custom TDEF, to function, you must add it into Systems Insight Manager. Add a TDef to
Systems Insight Manager using the mxtool -a command, as described in the following procedures:
Procedure 17-2 Adding a TDEF to Systems Insight Manager
1.
At a terminal or command line prompt, type mxtool -a -f <file pathname> .
NOTE:
For more information about mxtool command parameters, see
.
2.
To use the web launch tool previously created, type:
mxtool -a -f /tools/webjetadmin.xml
A successful TDEF addition results in a dialog box displaying the following
Successfully parsed tool file
Successfully added tool named "WebJetAdmin"
Successfully added 1 tool
Removing a TDEF from Systems Insight Manager
Removing a TDEF from Systems Insight Manager requires using the option -r when running the mxtools
command.
Removing a tool is not OS specific and can be run from and terminal or command prompt.
To remove a TDEF from Systems Insight Manager, use the mxtool -r command as in the following example:
Procedure 17-3 Removing a TDEF from Systems Insight Manager
1.
mxtool –r –f /tools/webjetadmin.xml
2.
A successful TDEF removal will result in the dialog box displaying the following:
Successfully parsed tool file
Successfully removed tool named "WebJetAdmin"
Successfully removed 1 tool
Creating custom tools through the Systems Insight Manager CLI
75