HP XP Continuous Access Software - Manual (Page 42)

42 Continuous Access XP for the XP1024/XP128
NOTE: Partition-level users in the StorageAdmins group cannot perform Continuous Access XP
operations. For more information about limitations, see the HP StorageWorks Command View XP user
guide for XP Disk Arrays or the HP StorageWorks XP Remote Web Console user guide for
XP1024/XP128.
Figure 19 Continuous Access XP main pane
Continuous Access XP panes
To access Continuous Access XP panes, click the following tabs: Pair Operation, RCU Operation,
Asynchronous Operation, Usage Monitor, or History Operations.
The Continuous Access XP main pane (also known as the Pair Operation pane) is displayed by clicking
the Pair Operation tab. This pane shows information for the selected CU image of the connected disk
array and provides access to all Continuous Access XP functions.
Table 12 shows the Continuous Access XP functions of each tab. To apply settings on the Continuous
Access XP function tabs, click Apply.
Table 12 Continuous Access XP functions
Tab Menu command Description
Pair Operation Pairdisplay Displays CU information, path information, pair status, and
settings information about
Continuous Access XP pairs.
Monitoring LDEV status is not supported.
Paircreate >
Synchronous
Sets new Continuous Access XP Synchronous pairs.
Paircreate >
Asynchronous
Sets new Continuous Access XP Asynchronous pairs.
Pairsplit - S Deletes Continuous Access XP pairs that are already set.
Pairsplit - r Splits or suspends Continuous Access XP pairs.
Pairresync Resumes Continuous Access XP pairs that are split or
suspended. Resuming in LDEVs is not supported.
Change Pair Option Modifies pair options that were originally set (Fence level or Error
level).