Avaya 5620SW + EU24 - Manual (Page 38)

Page 38 - Function Key Features Function Keys
Page 38 - Function Keys IP Office (R3.0) 5620SW + EU24 User’s Guide
Function Key Features 40DHB0002USEP – Issue 1 (13th January 2005)
Drop - Drop (!)
Clears a current calls.
This function does not require any data entered when programmed. This function can
be programmed through the phone by the user using an
Admin key.
For a call in progress, pressing Drop disconnects the caller.
When drop is used, silence is returned to the user rather than dial tone. This is
intended operation, reflecting that Drop is mainly used by call center headset users.
[User | Digital Telephony | Emulation | Drop]
DTone - Secondary Dial Tone
Return secondary dial tone to the user.
This function is currently not supported on the 5620 telephone.
Emrgy - Dial Emergency
Dials a specified number regardless of any call barring applied to the user.
This function requires entry of a number to dial when programmed. That number is
then shown next to Emrgy. This function cannot be programmed through the phone by
the user.
[User | Digital Telephony | Advanced | Dial | Dial Emergency]
Flash - Flash Hook (#)
Send a hook flash signal to the currently connected line.
This function does not require any data entered when programmed. This function
cannot be programmed through the phone by the user. This function can be
programmed through the phone by the user using an
Admin 1 key.
[User | Digital Telephony | Advanced | Miscellaneous | Flash Hook]
FolTo - Follow Me To
Forwards calls from this extension to the specified target.
This function requires the target extension to be entered when programmed. The
extension number is then shown next to FolTo. This function cannot be programmed
through the phone by the user.
Pressing FolTo sets the extension's Follow Me To number to the specified
extension and switches follow me use on. Whilst on, FolTo is shown with a symbol.
Press
FolTo again to switch off.
[User | Digital Telephony | Advanced | Follow Me | Follow Me To]