Avaya 5620SW + EU24 - Manual (Page 55)

Function Key Features Function Keys - Page 55
IP Office (R3.0) 5620SW + EU24 User’s Guide Function Keys - Page 55
40DHB0002USEP – Issue 1 (13th January 2005) Function Key Features
VMRB+ - Voicemail Ringback On
Switches voicemail ringback for the extension on/off.
This function does not require any data entered when programmed. This function
cannot be programmed through the phone by the user.
The VMRB+ key toggles voicemail ringback for the extension on/off. When on,
VMRB+ is shown with a symbol and the extension is called when new messages are
left in its mailbox.
[User | Digital Telephony | Advanced | Voicemail | Voicemail Ringback On]
VMCol - Voicemail Collect
Accesses a specified voicemail mailbox to collect or leave messages.
This function requires entry of the target mailbox name prefixed by either ? to collect
messages or # to leave a message. If just ? or # is entered then the calling extension's
mailbox is assumed. This function cannot be programmed through the phone by the
user.
The VMCol key appears followed by the mailbox name.
[User | Digital Telephony | Advanced | Voicemail | Voicemail Collect]
VMOff - Voicemail Off
Disables access to the user’s voicemail box.
This function does not require any data entered when programmed. This function
cannot be programmed through the phone by the user.
The VMOff key switches voicemail operation for the extension off.
[User | Digital Telephony | Advanced | Voicemail | Voicemail Off]
VMOn - Voicemail On
Enables/disables access to the user’s voicemail box.
This function does not require any data entered when programmed. This function
cannot be programmed through the phone by the user.
The VMOn key toggles voicemail operation for the extension on/off. When
voicemail is on, VMOn is shown with a symbol.
[User | Digital Telephony | Advanced | Voicemail | Voicemail On]
WUTim - Set Wrap Up Time
Sets the extension's busy wrap up time to be inserted between calls.
This function requires the time in seconds to be entered when programmed. The value
is shown next to WUTim. This function cannot be programmed through the phone by
the user.
Pressing WUTim sets the extension's busy wrap up time to the indicated number of
seconds. This time is used to set a delay between ending one call and the next call
ringing the extension (the waiting call may be indicated on the display however).
[User | Digital Telephony | Advanced | Set | Set Wrap Up Time]
See also:
• NATim - Set No Answer Time on page 47.