HP Deskjet 9800 Printer series - Manual (Page 82)

Printing banners
You can print large images and bold, oversized fonts on continuous feeds of paper. Following are
some guidelines for printing banners:
■ Use HP banner paper for great results.
■ Remove any perforated strips from the banner paper before loading it in the input tray.
■ Input tray capacity: up to 20 continuous sheets.
For Windows
1 Load the appropriate media (see Loading media in the input tray ).
Make sure the unattached edge is on top of the paper stack pointing towards the printer.
2 If your software program includes a banner-printing feature, follow the instructions provided with
the software program. Otherwise, follow the instructions below.
3 Open the printer driver (see Printing a document ).
4 Click the Paper/Quality tab.
5 Select the required banner size.
6 Select HP Banner Paper from the Type is drop-down list.
7 Change any other desired print settings and click OK.
8 Print your document.
For Macintosh
1 Load the appropriate media (see Loading media in the input tray ).
Make sure the unattached edge is on top of the paper stack pointing towards the printer.
2 If your software program includes a banner-printing feature, follow the instructions provided with
the software program. Otherwise, follow the instructions below.
3 Click File, and then click Page Setup.
4 Select the correct banner paper size and click OK.
5 Click File, and then click Print.
6 Change any other desired print settings and click Print to print your document.
72 4 Printing and loading media