HP Hitachi Dynamic Link Manager Software - Manual (Page 162)

146 Chapter 4 HDLM Operation
4.3.10 Viewing HDLM Component Information
To display HDLM component information, execute the dlnkmgr command's view operation
with the -sys parameter specified. The following shows an example in which the command
is executed:
>dlnkmgr view -sys
HDLM Version : xx
- xx
Service Pack Version :
Load Balance : on(rr)
Support Cluster : off
Elog Level : 3
Elog File Size (KB) : 9900
Number Of Elog Files : 2
Trace Level : 0
Trace File Size(KB) : 1000
Number Of Trace Files : 4
Path Health Checking : on(30)
Auto Failback : off
Remove LU : on
Intermittent Error Monitor : off
HDLM Manager Ver WakeupTime
Alive xx
- xx yyyy / mm / dd hh : mm : ss
HDLM Alert Driver Ver WakeupTime ElogMem Size
Alive xx
- xx yyyy / mm / dd hh : mm : ss 128
HDLM Driver Ver WakeupTime
Alive xx
- xx yyyy / mm / dd hh : mm : ss
License Type Expiration
Permanent -
KAPL01001-I The HDLM command completed normally. Operation name = view, completion
time = yyyy
/ mm / dd hh : mm : ss
>
Among the displayed items, HDLM Manager, HDLM Alert Driver, and HDLM Driver
indicate the HDLM component information.
You can also view information for each HDLM component. Execute the dlnkmgr command's
view operation with the -sys and subsequent parameter specified. The following shows an
example in which the command is executed:
>dlnkmgr view -sys -msrv
>dlnkmgr view -sys -adrv
>dlnkmgr view -sys -pdrv