HP Hitachi Dynamic Link Manager Software - Manual (Page 343)

HiCommand ® Dynamic Link Manager (HDLM) for Windows ® Systems User’s Guide 327
9.6 HDLM Driver (Filter Component) Messages
Message ID Message Details and Actions
KAPL05001-I DriverEntry() started. Details
The initialization function was executed (started).
Action
None.
KAPL05002-I DriverEntry() completed normally. Details
The initialization function completed successfully.
Action
None.
KAPL05003-I The HDLM driver (filter component) was
successfully attached to Disk ( aa...aa ),
Partition ( bb...bb ).
Details
The device object of the HDLM driver (filter
component) was added to the device stack
corresponding to Disk ( aa...aa : Disk sequence
number) and Partition ( bb...bb : Partition
sequence number that is fixed to 0 ).
Action
None.
KAPL05004-I The filtering function ( aa...aa ) for the
HDLM driver (filter component) was initialized
successfully.
Details
The HDLM driver (filter component) was
successfully initialized for each device object.
aa...aa : Device object address (hexadecimal
number)
Action
None.
KAPL05005-I The control function ( aa...aa ) for the HDLM
driver (filter component) was initialized
successfully.
Details
The HDLM driver (filter component) was
successfully initialized for each device object.
aa...aa : Device object address (hexadecimal
number)
Action
None.
KAPL05008-E Could not allocate memory.
( aa...aa : bb...bb )
Details
The operating system memory allocation function
or the function that allocates memory of the
specified size as a side effect could not be
executed. ( aa...aa : Information indicating the
number of program lines (hexadecimal number),
bb...bb : Memory capture size (hexadecimal
number))
Action
Check whether the HDLM driver has started
normally. If it has not started or contains an error,
execute the DLMgetras utility for collecting
HDLM error information, and then contact your
HDLM vendor or the maintenance company if
there is a maintenance contract for HDLM. For
details on the DLMgetras utility, see section 8.2.