HP Hitachi Dynamic Link Manager Software - Manual (Page 60)

44 Chapter 2 HDLM Functions
2.11.1 Collected Logs
HDLM collects information on the detected error and trace information in the integrated
trace file, trace file, error logs and event logs. You can use the error information to examine
the status of an error and analyze the cause of the error.
The information about the Windows system-down is output to a system memory dump file.
A system memory dump file is a file to which the system memory data is output when
Windows system-down occurs. This file is required when Windows system-down occurs.
Specify the following procedure to output the system memory dump file.
Click Control Panel, System, Startup/Shutdown, Write Debugging Information is chosen
with Recovery, and then choose Kernel Memory Dump or Complete Memory Dump.
Table 2.7 describes the types of error information.
Table 2.7 Types of Error Information
Log Name Description Output Destination
Integrated
trace file
Operation logs of the HDLM command and GUI
are collected.
The default file path is drive-for-program-
installation:\Program
Files
1 \HITACHI\HNTRLib2\spool\hntr2n.log ( n
indicates a file number)
To specify the output destination directory and the file
prefix for the integrated trace file, use a utility of Hitachi
Network Objectplaza Trace Library ( HNTRLib2 ).
Trace file Trace information on the HDLM manager is
collected for the level set by the user. If an error
occurs, you might need to change the settings
to collect trace information.
The trace file name is \Program
Files\HITACHI\DynamicLinkManager\log\hdlm
tr[1-64].log
2
Error log Error information for the user-defined level is
collected from detected errors. By default,
HDLM collects all detected error information.
HDLM Manager logs:
\Program
Files\HITACHI\DynamicLinkManager\log\dlmmgr[1
-16].log
2
HDLM GUI logs:
\Program
Files\HITACHI\DynamicLinkManager\log\dlmgui[1
-2].log
2
HDLM remote access interface logs:
\Program
Files\HITACHI\DynamicLinkManager\log\dlmwebag
ent[
1- n].log 2
The value n depends on the setting in the file
dlmwebagent.properties .
Event log Information about very severe errors (severity
level is Critical or Error ) is collected from
detected errors.
You can use administrative tools such as Event
Viewer to check event logs.
Event log (application log)
1 In the Windows Server 2003(IPF and x64), replace this part with Program Files ( x86 ) .