HP Photosmart Premium TouchSmart Web C309 User Manual

Page 61

Advertising
background image

Case E: Shared voice/fax line

If you receive both voice calls and fax calls at the same phone number, and you have no
other office equipment (or voice mail) on this phone line, set up the HP Photosmart as
described in this section.

Figure 9-4 Back view of the HP Photosmart

1 Telephone wall jack

2 Use the phone cord supplied in the box with the HP Photosmart to connect to the "1-LINE"

port

3 Telephone (optional)

To set up the HP Photosmart with a shared voice/fax line

1.

Using the phone cord supplied in the box with the HP Photosmart, connect one end
to your telephone wall jack, then connect the other end to the port labeled 1-LINE on
the back of the HP Photosmart.

NOTE:

If you do not use the supplied cord to connect from the telephone wall

jack to the HP Photosmart, you might not be able to fax successfully. This special
phone cord is different from the phone cords you might already have in your home
or office.

2.

From the HP Photosmart touch screen display, access the Fax Settings menu to do
the following:
a. Set the Auto Answer option.

Turn it on if you want the HP Photosmart to answer calls automatically.

Turn it off if you want to respond to incoming calls in person.

b. Run a fax test.

3.

Plug your phone into the telephone wall jack.

4.

Do one of the following, depending on your phone system:

If you have a parallel-type phone system, remove the white plug from the port
labeled 2-EXT on the back of the HP Photosmart, and then connect a phone to
this port.

If you have a serial-type phone system, you might plug your phone directly on top
of the HP Photosmart cable which has a wall plug attached to it.

Chapter 9

58

Fax

Fa
x

Advertising