HP StorageWorks XP Remote Web Console Software - Manual (Page 103)

Continuous Access XP Journal user guide 103
CAUTION: In general, you can delete journal volumes only when the journal group’s attribute is
Initial or the journal group’s status is Stop or Hold(Failure).
5. In the JNL Volumes list of the Edit JNL Volumes pane ( Figure 46 ), select the volumes you want to
delete. In the JNL Volumes list, one row represents one volume.
6. Click Delete. The volumes you want to delete appear in blue italics. The Operation column of the list
displays Delete.
7. Click Set to close the Edit JNL Volumes pane.
8. In the Preset list, check the volumes you want to delete.
• To add volumes to delete, right-click a volume in the Preset list, and select Modify. A pane appears
where you can specify volumes to delete.
• To cancel deleting a volume, right-click the volume, and select Cancel.
• If necessary, repeat
step 3 through step 8 to delete volumes from other journal groups.
9. Click Apply to delete journal volumes.
NOTE: If an error occurs, the right-most column of the Preset list displays the error code. To view
detailed information about the error, right-click the error code, and select Error Detail. An error
message appears providing detailed information about the error.
Displaying detailed information about journal groups
To display detailed information about journal groups in the primary array, log into the primary array.
To display detailed information about journal groups in the secondary array, log into the secondary
array.
1. Display the Journal Operation pane (see ” Displaying the Journal Operation pane ” on page 95).
2. Select a journal group in the tree.
NOTE: You cannot select more than one journal group.
3. Do one of the following:
• In the tree, right-click the selected journal group, and select JNL Groups and JNL Status.
• In the upper-right list, right-click the desired journal group, and select JNL Groups and JNL Status.
4. In the JNL Group Detail pane ( Figure 47 ), view detailed information about the journal group.
Table 26 Requirement to delete journal volumes (when one journal group uses two mirror IDs)
Status of journal group Can journal volumes be deleted?
Mirror ID 1 Mirror ID 2
Active Hold No
Active Hold(Failure) No
Stop Hold Yes
Stop Hold(Failure) Yes