HP StorageWorks XP Remote Web Console Software - Manual (Page 169)

Continuous Access XP Journal user guide 169
• ” Deleting Continuous Access XP Journal volume pairs ” on page 172
Figure 88 Overview of remote copy operations
Starting Continuous Access XP Journal operations and creating Continuous Access XP Journal
pairs
If the Continuous Access XP Journal S-VOL contains a file system, you must delete the file system using the
enas_fsdelete
command in NAS Blade Manager before starting Continuous Access XP Journal
operations. Also, if you use the Continuous Access XP Journal S-VOL for the Snapshot feature in NAS
Backup Restore, you must delete the Snapshot definitions using the
snapvoldel
command before starting
Continuous Access XP Journal operations. If the differential-data storage device of NAS Sync Image is in
the Continuous Access XP Journal S VOL, you must release it using the
syncstop
command before
starting Continuous Access XP Journal operations.
To start Continuous Access XP Journal operations and create a Continuous Access XP Journal volume pair:
1. At the primary and secondary sites, start RAID Manager XP.
sudo horcmstart.sh
(1-instance configuration)
sudo horcmstart.sh 16 17
2. At the secondary site, reserve the device file used as a target file system.
• Non-LVM:
sudo horc_svol_define -d Device file number
• LVM:
sudo horc_svol_vmdefine -d Device file number,...
3. At the primary site, create a Continuous Access XP Journal volume pair.
sudo paircreate {-g group-name|-d volume-name} -f {never|async} -vl -jp
master journal group ID -js restore journal group ID
4. At the primary site, check the completion of the Continuous Access XP Journal volume pair creation.
sudo pairvolchk {-g group-name|-d volume-name}
NOTE: You can also use the
pairevtwait
command, which waits for the volumes to be paired.
pairvolchk: Volstat is P-VOL.[status = COPY] => Creating
pairvolchk: Volstat is P-VOL.[status = PAIR] => Created