Pair operation pane components, Figure 50 pair operation pane, 50 pair operation pane – HP StorageWorks XP Remote Web Console Software User Manual
Page 116
116 Performing Continuous Access XP Journal pair operations
Pair Operation pane components
Figure 50
Pair Operation pane
•
Tree: Lists ports in the local array (
). Host groups or iSCSI targets (
) appear below each port. If
you select a port, host group, or iSCSI target, the list displays volumes for the port, host group, or iSCSI
target. You can select only one port, host group, or iSCSI target at one time and cannot select two or
more simultaneously.
•
Upper-right buttons: The following buttons appear at the upper-right corner of the pane:
• Display Filter: Displays the Display Filter pane (
). Use this pane to narrow information in
the list, so the list displays only volumes that satisfy certain conditions. For more information, see
Filtering information in the list on the Pair Operation pane
• Snapshot: Saves information about volume pairs in a text file. For more information, see ”
pair status information to a text file
• Previous: The list can display up to 1,024 volume pairs simultaneously. If the number of volume
pairs exceeds 1,024, use the Previous button to display the previous 1,024 volume pairs in the list.
• Next: The list can display up to 1,024 volume pairs simultaneously. If the number of volume pairs
exceeds 1,024, use the Next button to display the next 1,024 volume pairs in the list.
•
List: Displays volumes in the local array. One row represents one volume.
By default, information in the list is sorted by the port numbers. For volumes with more than one path,
each path is displayed in a separate row.
The maximum number of rows in the list is 1,024. If the number of volumes exceeds the number of
rows, use the Previous and Next buttons to view information about volumes that do not appear in the
list currently.
NOTE:
Use the vertical and horizontal scroll bar if the information you want to view is hidden and
invisible.