HP StorageWorks XP Remote Web Console Software - Manual (Page 93)

Continuous Access XP Journal user guide 93
• If a logical path is selected in the list, the DKC status pane displays only the status of the selected
logical path.
5. Check the status of the logical paths, and click Close to close the DKC status pane.
Figure 43 DKC Status pane
• List:
• No.: Serial numbers used for rows in the list.
• Path Status: Logical path status (see
Table 25 ).
• Port: Port on the local array.
• Pair-Port: Port on the remote array.
• DKC S/N: Remote array’s serial number.
• Path Gr. ID: Path group ID.
• M-R Path: Type of channel interface between the local and remote arrays. This column displays fibre.
• Minimum Paths: Minimum possible number of paths between the local and remote arrays.
• RIO MIH Time: RIO MIH timer value, which is the wait time until a data transfer from the local array to
the remote array is complete.
NOTE: RIO MIH is an acronym for remote I/O missing interrupt handler.
• DKC Registered: Date and time when the local and remote arrays are associated to each other.
• Last Updated: Date and time when the last operation on a logical path to the remote array was
performed.
• Refresh the DKC Operations tab after this panel is closed: If selected, information in the DKC
Operation pane is refreshed after you close the DKC Status pane.
• Refresh: Refreshes information in the DKC Status pane.
• Close: Closes the DKC Status pane.
Table 25 Logical path status
Status Remarks
Normal This path was successfully established and can be used for Continuous Access XP
Journal remote copy activities.
Nothing An operation for configuring or deleting this logical path is in progress.