HP Integrated Lights-Out 3 - Manual (Page 111)

When less important events are repeated, they are consolidated into one event log entry, and
the Count and Last Update values are updated. Each event type has a specific time interval
that determines whether repeated events are consolidated or a new event is logged.
•
Description—The description identifies the component and detailed characteristics of the
recorded event.
If the iLO firmware is rolled back, the description UNKNOWN EVENT TYPE might be displayed
for events recorded by the newer firmware. You can resolve this issue by updating the firmware
to the latest supported version, or by clearing the log.
Marking a log entry as repaired
Use this feature to change the status of an IML log entry from Critical or Caution to Repaired. You
must have the Configure iLO Settings privilege to use this feature.
When a Critical or Caution event is reported in the IML log:
1.
Investigate and repair the issue.
2. Navigate to the Information
→Integrated Management Log page.
3. Select the log entry.
4. Click Mark as Repaired.
The iLO web interface refreshes, and the selected log entry status changes to Repaired.
Adding a maintenance note to the IML
Use the maintenance note feature to create a log entry that logs information about maintenance
activities such as component upgrades, system backups, periodic system maintenance, or software
installations. You must have the Configure iLO Settings privilege to use this feature.
1.
Navigate to the Information
→Integrated Management Log page.
2. Click Add Maintenance Note.
The Enter Maintenance Note window opens, as shown in Figure 56 (page 111) .
Figure 56 Enter Maintenance Note window
3. Enter the text that you want to add as a log entry, and then click OK.
You can enter up to 227 bytes of text. You cannot submit a maintenance note without entering
some text.
An Informational log entry with the class Maintenance is added to the IML.
Saving the IML
To save the IML as a CSV file:
1.
Click the View CSV button.
The IML is displayed in a format that you can copy and paste into a text editor.
2. Copy the text displayed in the CSV Output window, and save it in a text editor as a *.csv
file.
Using the Integrated Management Log 111