HP Integrated Lights-Out 3 - Manual (Page 87)

Using the iLO RBSU
Accessing the iLO RBSU
You can access the iLO RBSU from the physical system console, or by using an iLO remote console
session.
To access iLO RBSU:
1.
Optional: If you access the server remotely, start an iLO remote console session.
You can use the .NET IRC or Java IRC.
2. Restart or power on the server.
3. Press F8 in the HP ProLiant POST screen.
The iLO RBSU screen appears.
4. Select an option, and then press Enter.
You can use iLO RBSU to perform the following tasks:
•
“Configuring NIC and TCP/IP settings” (page 87)
•
“Configuring DNS/DHCP settings” (page 88)
•
“Configuring global settings by using iLO RBSU” (page 89)
•
“Configuring serial CLI options by using iLO RBSU” (page 90)
•
“Resetting iLO to the factory default settings by using iLO RBSU” (page 230)
•
“Managing iLO users by using iLO RBSU” (page 18)
Configuring NIC and TCP/IP settings
You can use the iLO RBSU Network menu to configure basic iLO network options, including NIC
and TCP/IP settings.
To configure NIC and TCP/IP settings:
1.
Optional: If you access the server remotely, start an iLO remote console session.
You can use the .NET IRC or Java IRC.
2. Restart or power on the server.
3. Press F8 in the HP ProLiant POST screen.
The iLO RBSU screen appears.
4. Select Network
→NIC and TCP/IP.
The Network Configuration screen appears, as shown in Figure 39 (page 88) .
Using the iLO RBSU 87