Advantech INTRAC-305 - Manual (Page 25)

INTRAC-305 OPERATION
© 2011 Advantech Wireless INTRAC-305 MANUAL - Issue 3.2 Page 13
3
STANDBY
1
2
3
4
5
6
moves to the New Mode menu (not
available when in remote Control Mode)
Standby
New
Mode
puts the antenna control system into
STANDBY mode
Local
Current Mode
Beac Level
Beac Freq
El Angle
Az Angle
Pol Angle
Select
Remote
(Local)
Function
Show
Alarms
moves to the 1st ‘Function’ menu(not
available when in remote Control Mode)
shows the Alarms menu ie the currently
active alarms
toggles the INTRAC between Remote
and Local control modes
Home
Path STANDBY
Note This menu can be reached directly from almost every menu
by pressing Menu Key 1.
Description Standby is a monitoring but no movement mode.
The antenna is not driven in this mode but its position and the
beacon signal strength are monitored and displayed.
External inputs are also monitored and any appropriate
alarm(s) become active. The System Alarm indicator will
illuminate and the alarms may be viewed by pressing “Show
Alarms”.
Standby mode is entered in one of three ways :-

by being selected by the operator using Menu Key 1.

by a primary alarm becoming active.

at the end of a Goto move or at the end of a search.