Advantech INTRAC-305 - Manual (Page 49)

INTRAC-305 OPERATION
© 2011 Advantech Wireless INTRAC-305 MANUAL - Issue 3.2 Page 37
3
FITTED OPTIONS
Beacon Receiver: Fitted
Beac pol select: Not Fitted
Polarization : Fitted
Mount Az/El : Fitted
Type HrAng/Dcl: Not Fitted
Resolver x2 : Fitted
Type x1 : Not Fitted
Extended Az : Not Fitted
Geared Pol : Not Fitted
SimAx Drive : Fitted
Inv Beacon Lock: Not Fitted
1
2
3
4
5
6
(not used)
toggles the highlighted parameter
between Fitted/Not Fitted
resets the menu to display the currently
stored values
moves the highlight box to the next field
in the current menu
Current Mode Tracking
Control State Local
Beac Freq 11.452000 GHz
Beac Level -10.05 dB
El Angle 25.37
Az Angle 210.50
Pol Angle 27.4
Function
Press EN to accept all fields
Next
Field
Fitted/
Not
Home
Standby
puts the antenna control system into
STANDBY mode and skips to the HOME
menu
skips to the Home (root) menu
Recall
Existing
Settings
Path HOME - FUNCTION - SYSTEM SETUP -
MENU KEY 6 (x6) - ENTER
or From Models or Configuration
SYSTEM SETUP - MENU KEY 6 (x6) - ENTER
Description Various options such as polarisation drive and simultaneous
axis drive are available on the INTRAC-305. Their use has to
be programmed into the INTRAC in order for them to be
usable. That programming is carried out in this menu.
The various options are shown on this screen.
Menu Key 6 (Next Field) steps the highlighted edit line
through the options.
Menu Key 4 (Fitted/Not) toggles the option between fitted and
not fitted.
Menu Key 5 (Recall Existing Settings) resets the options to
the state they were in when this menu was entered.
Pressing ENTER accepts the displayed settings.
Note Beacon Pol Select, Extended Az, Geared Pol, and Inv
Beacon Lock should be set to “Not Fitted”.
SimAx Drive should be set to “Fitted”.
Normally, when replacing an APC300, the correct resolver
type will be x2.