Advantech INTRAC-305 - Manual (Page 40)

OPERATION INTRAC-305
Page 28 INTRAC-305 MANUAL - Issue 3.2 ©2011 Advantech Wireless
CONTRAST & BRIGHTNESS
1
2
3
4
5
6
puts the antenna control system into
STANDBY mode and skips to the HOME
menu
skips to the Home (root) menu
adjusts contrast of LCD display panel
adjusts brightness of LCD display panel
restores factory defined baseline
settings
moves the highlight box to the next field
in the current menu
Standby
Home
Contrast
adjust
Bright
adjust
Normal
Function
Press Enter to store values
Next
Field
Path HOME - FUNCTION - SYSTEM SETUP - ENTER
or From Models or Configuration
SYSTEM SETUP - ENTER
Description The screen Contrast and Brightness can be adjusted in this
menu.
The Contrast range is from 0 to 15 and the Brightness range
is from 0 to 8.
The levels are set using Menu Key 3 for contrast and Menu
Key 4 for brightness.
Each press of a key increases the displayed number by one
and the screen brightness or contrast changes.
When the display is at its most visible press ENTER to store
the values.
Menu Key 5 (Normal) sets the Brightness and Contrast to the
default values which are 8 in both cases.
Note The Flicker setting is not an operator controllable parameter.