Advantech INTRAC-305 - Manual (Page 48)

OPERATION INTRAC-305
Page 36 INTRAC-305 MANUAL - Issue 3.2 ©2011 Advantech Wireless
SELECT STOW USE
1
2
3
4
5
6
skips to the Stow Setup menu
(not used)
toggles the currently highlighted
parameter between ‘ Used’ & ‘Not Used’
Current Mode Tracking
Control State Local
Beac Freq 11.452000 GHz
Beac Level -10.05 dB
El Angle 25.37 o
Az Angle 210.50 o
Pol Angle 27.4 o
Mode
Press EN to accept settings
Home
Standby
puts the antenna control system into
STANDBY mode and skips to the HOME
menu
skips to the Home (root) menu
Used/
Not Used
Stow
Setup
Next
Field
moves the highlight box to the next field
in the current menu
Final Stow Positions:
Az angle
> Used <
El angle Not Used
Preliminary Stow Positions:
Az angle Not Used
El angle Used
Path
MENU KEY 3 from “Stow Setup” on previous page.
Description Allows the Azimuth and Elevation Preliminary & Final Stow
Positions to be enabled or disabled.
Note If both Preliminary Stow axes are disabled the antenna will
drive direct to the Final Stow position on pressing the Stow
key. If only one Preliminary axes is disabled the antenna will
drive in the other axis to its Preliminary position before
carrying on to the Final position.
Menu key 6 (Next Field) steps the edit highlight through the
four fields. Menu Key 5 (Used/Not Used) toggles the selected
field between used and not used.
Pressing ENTER accepts the displayed settings and returns
to the “STOW SETUP” menu.