Advantech INTRAC-305 - Manual (Page 9)

INTRAC-305 QUICK START GUIDE
© 2011 Advantech Wireless
. INTRAC-305 MANUAL - ISSUE 3.2 Page ix
If an IBR-L is not fitted then provide a voltage signal to the beacon 1 input. You will need to
adjust the potentiometers (See manual page 76) to set the gain and offset to the correct
values. Manually peak the antenna to maximize the beacon level and check that the
beacon does not overload (24.9 dB displayed).
11/ Set any other parameters, such as Soft Limits.
12/ Select Auto-New Model (Home>New Mode>Auto New Model) and press enter. Monitor
system over 24 hours and check that system is maintaining track with displayed mode
“Learning”. Soon after the 24 hour learning period the mode should change to “Tracking”,
indicating that the system has successfully computed a full INTRAC model.