Advantech INTRAC-305 - Manual (Page 47)

INTRAC-305 OPERATION
© 2011 Advantech Wireless INTRAC-305 MANUAL - Issue 3.2 Page 35
3
STOW SETUP
1
2
3
4
5
6
Current Mode Tracking
Control State Local
Beac Freq 11.452000 GHz
Beac Level -10.05 dB
El Angle 25.37 o
Az Angle 210.50 o
Pol Angle 27.4 o
Function
Press EN to accept settings
Home
Standby
puts the antenna control system into
STANDBY mode and skips to the HOME
menu
skips to the Home (root) menu
Stows (or Unstows) the antenna
(not used)
Stow/
Unstow
moves the highlight box to the next field
in the current menu
moves to the Select Stow Use menu
Select
Stow
Use
Next
Field
Final Stow Positions:
Az angle 180.000
o
El angle 90.000 o
Preliminary Stow Positions:
Az angle 160.000
o
El angle - 0.500 o
Path HOME - FUNCTION - SYSTEM SETUP -
MENU KEY 6 (x5) - ENTER
or From Models or Configuration
SYSTEM SETUP - MENU KEY 6 (x5) - ENTER
Description This menu is used to set the co-ordinates for the preliminary
and final antenna stow positions.
With the antenna not in the Stow position pressing the
Stow/Unstow key causes the antenna to be driven to the Final
Stow Position via the Preliminary Stow Position.
Note The Preliminary and/or Final pos
itions may be set to “used” or
“not used” in the “Select Stow Use” menu (Menu Key 3). (see
next page)
Menu key 6 (Next Field) steps the edit box through the four
angle fields. The co-ordinates can be changed using the
Numeric Keypad.
Notes If all positions are enabled the antenna is driven, in both axes,
to the Preliminary Stow Position. When both axes reach that
position the antenna is driven to the Final Stow Position
Unstow drives the antenna to the Preliminary Stow Position.
The only antenna command possible from the Stow Position
is Unstow.