HP Deskjet F2235 All-in-One Printer User Manual
Page 107
NOTE:
There is no problem with the ink supplies and replacing the print cartridges
is unnecessary.
•
Solution 1: Check the paper type
•
Solution 2: Check the print quality setting
•
Solution 1: Check the paper type
Solution: HP recommends that you use HP Premium Papers or any other paper
type that is appropriate for the product.
Always make sure the paper you are printing on is flat. For best results when printing
images, use HP Premium Plus Photo Paper.
Store photo media in its original packaging inside a resealable plastic bag on a flat
surface in a cool, dry place. When you are ready to print, remove only the paper you
plan to use immediately. When you have finished printing, return any unused photo
paper to the plastic bag. This will prevent the photo paper from curling.
NOTE:
There is no problem with the ink supplies and replacing the print
cartridges is unnecessary.
For more information, see:
•
Recommended papers for printing and copying
•
Cause: The wrong kind of paper was loaded in the input tray.
If this did not solve the issue, try the next solution.
Solution 2: Check the print quality setting
Solution: Check the quality setting. Use a higher quality setting to increase the
amount of ink used for printing.
NOTE:
For maximum dpi resolution, go to the Advanced tab, and then select
Enabled from the Maximum dpi drop-down list. For more information, see
.
For more information, see:
•
Change the print speed or quality
•
•
Cause: The print quality setting was set too low.
If this did not solve the issue, try the next solution.
Chapter 12
104
Troubleshooting
T
roub
les
hoot
ing