The product will not turn on – HP Deskjet F2235 All-in-One Printer User Manual
Page 87
This section contains the following topics:
•
•
I connected the USB cable, but I am having problems using the HP All-in-One with
my computer
•
After setting up the product, it does not print
The product will not turn on
Try the following solutions to resolve the issue. Solutions are listed in order, with the most
likely solution first. If the first solution does not solve the problem, continue trying the
remaining solutions until the issue is resolved.
•
Solution 1: Make sure the power cord is connected
•
Solution 2: Press the On button more slowly
Solution 1: Make sure the power cord is connected
Solution:
•
Make sure the power cord is firmly connected to both the product and the power
adapter. Plug the power cord into a power outlet, surge protector, or power strip.
1 Power connection
2 Power cord and adapter
•
If you are using a power strip, make sure the power strip is on. Or, try plugging
the product directly into a power outlet.
•
Test the power outlet to make sure it is working. Plug in an appliance that you
know works, and see if the appliance has power. If not, then there might be a
problem with the power outlet.
•
If you plugged the product into a switched outlet, make sure the outlet is switched
on. If it is switched to on but still does not work, then there might be a problem
with the power outlet.
Cause: The product was not properly connected to a power supply.
Chapter 12
84
Troubleshooting
T
roub
les
hoot
ing