Solution 1: uninstall and reinstall the software – HP Deskjet F2235 All-in-One Printer User Manual

Page 141

Advertising
background image

Solution 7: Scan with Windows Image Acquisition (WIA)

Solution 8: Disable the Lexbces service

Solution 9: Run the Scan Diagnostic utility

Solution 10: Install a patch

Solution 11: Check the USB chipset and controller

Solution 12: Uninstall the software and reset the product

Solution 1: Uninstall and reinstall the software

Solution: Verify that the software was installed correctly. Open the HP Solution
Center and verify that all the icons and buttons are present.
If the appropriate icons and buttons for your product (such as Make Copies) do not
appear, your installation might not be complete, and you might need to uninstall and
then reinstall the software. Do not simply delete the application files from your hard
drive. Make sure to remove them properly using the uninstall utility provided with the
software.

To uninstall from a Windows computer

NOTE:

Use this method if Uninstall is not available in the Windows Start menu

(click Programs or All Programs, HP, Deskjet F2200 All-In-One series,
Uninstall).

1.

Open the Windows control panel and double-click Add or Remove Programs.

NOTE:

The procedure to open the control panel varies by operating system.

If you are not sure how to do this, see the Windows Help.

2.

Select HP Deskjet All-In-One Driver Software, and then click Change/
Remove
.
Follow the onscreen instructions.

3.

Disconnect the product from your computer.

4.

Restart your computer.

NOTE:

It is important that you disconnect the product before restarting your

computer. Do not connect the product to your computer until after you have
reinstalled the software.

5.

Insert the product CD-ROM into your computer’s CD-ROM drive and then start
the Setup program.

6.

Follow the onscreen instructions and the instructions provided in the Setup Guide
that came with the product.

After you have reinstalled the software, try to scan again.
Cause: The software installation was not complete.
If this did not solve the issue, try the next solution.

Chapter 12

138

Troubleshooting

T

roub
les
hoot

ing

Advertising