Solution 4: verify the driver configuration – HP Deskjet F2235 All-in-One Printer User Manual
Page 157
4.
Reconnect the USB cable to the product and the computer.
After reconnecting the USB cable, the product should start printing the jobs in
queue.
NOTE:
If you are connecting the product through a USB hub, make sure the
hub is turned on. If the hub is on, try connecting directly to your computer.
5.
If the product does not start printing automatically, start another print job.
Cause: The USB cable needed to be disconnected.
If this did not solve the issue, try the next solution.
Solution 4: Verify the driver configuration
Solution: Check to make sure the product is set as the default printer and it is using
the correct printer driver.
To verify that the product is set as the default printer
1.
Depending upon your operating system, do one of the following:
•
Windows Vista: On the Windows taskbar, click Start, click Control Panel, and
then click Printers.
•
Windows XP: On the Windows taskbar, click Start, click Control Panel, and
then click Printers and Faxes.
•
Windows 2000: On the Windows taskbar, click Start, point to Settings, and
then click Printers.
2.
Make sure the correct product is set as the default printer.
The default printer has a check mark in a black circle next to it.
3.
If the wrong product is set as the default printer, right-click the correct product and
select Set as Default.
Chapter 12
154
Troubleshooting
T
roub
les
hoot
ing