HP Deskjet F2235 All-in-One Printer User Manual
Page 191
Solution 3: Check the power source
Solution: Verify that the product is properly connected to a suitable power source.
To verify that the product is connected to a suitable power source
1.
Verify that the product has a two-prong power plug, and make sure you are using
the power cord provided with the product.
2.
If the product is connected to a computer, make sure the computer has the correct
power plug depending on your country/region.
3.
Make sure the power cord is firmly connected to both the product and the power
adaptor.
4.
Plug the power cord directly into a wall outlet.
1 Power connection
2 Power cord and adaptor
5.
Try to print from your computer.
If the product prints when plugged directly into a wall outlet while disconnected
from any power strips or surge suppressors, the power strip or surge suppressor
might not be allowing sufficient voltage to reach the product.
6.
If the product cannot print and the print carriage is still stalled, contact HP support
for service.
Go to
.
If prompted, choose your country/region, and then click Contact HP for
information on calling for technical support.
Cause: There might not be not be sufficient voltage for the product.
Chapter 12
188
Troubleshooting
T
roub
les
hoot
ing