HP Deskjet F2235 All-in-One Printer User Manual
Page 152
3.
Make sure the test patterns show a complete grid and the thick color lines are
complete.
•
If more than a few lines in a pattern are broken, this might indicate a problem
with the nozzles. You might need to clean the print cartridges.
•
If the black line is missing, faded, streaked, or shows lines, this might indicate
a problem with the black print cartridge in the right slot.
•
If any of the color lines are missing, faded, streaked, or show lines, this might
indicate a problem with the tri-color print cartridge in the left slot.
More information about using a USB hub
•
Verify that the USB hub is a powered hub and the power adapter is plugged in.
Some powered hubs do not include the power adapter as a standard item.
•
The hub must be plugged into a power source.
•
Some hubs cannot handle more than four full-power USB devices. You can
connect a maximum of five hubs to the system.
•
If the product has trouble with a hub when the hubs are connected together, or
there are more than four devices on the hub, connect the product to the hub that
is directly connected to the computer (unless there are known issues).
Cause: There was a compatibility issue with USB chipsets installed on the
computer.
If this did not solve the issue, try the next solution.
Solution 12: Uninstall the software and reset the product
Solution: Uninstall the software completely, and then reinstall it.
To uninstall the software and reset the product
1.
Disconnect and reset the product.
To disconnect and reset the product
a. Make sure the product is turned on.
b. Press the On button to turn off the product.
c. Disconnect the power cord from the back of the product.
d. Reconnect the power cord to the back of the product.
e. Press the On to turn on the product.
2.
Uninstall the software completely.
NOTE:
It is important that you follow the uninstall procedure carefully to
ensure you have removed the software completely from the computer, before
reinstalling it.
Errors
149
Trou
bles
ho
ot
ing