HP Deskjet F2235 All-in-One Printer - Manual (Page 203)

Also, make sure the print cartridges are installed into the correct slots.
To make sure the print cartridges are installed correctly
1. Make sure the product is on.
CAUTION: If the HP All-in-One is off when you open the print cartridge door
to access the print cartridges, the HP All-in-One will not release the cartridges
for changing. You might damage the HP All-in-One if the print cartridges are
not docked safely when you try to remove them.
2. Open the print cartridge door.
The print carriage moves to the center of the product.
3. Check to make sure you are using the correct print cartridges for your product.
For a list of compatible print cartridges, see the printed documentation that came
with the product.
4. Remove the black print cartridge from the slot on the right. Do not touch the ink
nozzles or the copper-colored contacts. Check for possible damage to the copper-
colored contacts or ink nozzles.
Make sure the clear plastic tape has been removed. If it is still covering the ink
nozzles, gently remove the clear plastic tape by using the pink pull tab. Make sure
you do not remove the copper colored tape containing the electrical contacts.
1 Copper-colored contacts
2 Plastic tape with pink pull tab (must be removed before installing)
3 Ink nozzles under tape
Chapter 12
200 Troubleshooting
T
roub
les
hoot
ing