HP LaserJet Enterprise MFP M725 series - Manual (Page 217)

5. Touch the IP Address , Subnet Mask , or Default Gateway option.
6. Touch the first field to open a keypad. Enter the correct digits for the field, and then touch the OK
button.
Repeat the process for each field, and then touch the Save button.
Manually configure IPv6 TCP/IP parameters from the control panel
Use the control-panel Administration menus to manually set an IPv6 address.
1. From the Home screen on the product control panel, scroll to and touch the Administration button.
2. To enable manual configuration, open the following menus:
● Network Settings
● Jetdirect Menu
● TCP/IP
● IPV6 Settings
● Address
● Manual Settings
● Enable
Select the On option, and then touch the Save button.
3. To configure the address, touch the Address button and then touch the field to open a keypad.
4. Use the keypad to enter the address, and then touch the OK button.
5. Touch the Save button.
ENWW Configure IP network settings 203