Calibrate the scanner, Check the paper settings, Check the paper size and type configuration – HP LaserJet Enterprise MFP M725 series User Manual
Page 272: Select the tray to use for the copy, Check the image-adjustment settings, Calibrate the scanner check the paper settings
Calibrate the scanner
If the copied image is not positioned correctly on the page, calibrate the scanner.
NOTE:
When using the document feeder, make sure to adjust the guides in the input tray so they are
against the original document.
1.
From the Home screen on the product control panel, scroll to and touch the
Device Maintenance
button.
2.
Open the following menus:
●
Calibration/Cleaning
●
Calibrate Scanner
3.
Touch the
Next
button to start the calibration process. Follow the on-screen prompts.
4.
Wait while the product calibrates, and then try copying again.
Check the paper settings
Check the paper settings if copied pages have smears, fuzzy or dark print, curled paper, scattered dots
of toner, loose toner, or areas where toner has dropped out.
Check the paper size and type configuration
1.
From the Home screen on the product control panel, scroll to and touch the
Trays
button.
2.
Touch the line for the tray that you want to configure, and then touch the
Modify
button.
3.
Select the paper size and paper type from the lists of options.
4.
Touch the
OK
button to save your selection.
Select the tray to use for the copy
1.
From the Home screen on the product control panel, touch the
Copy
button.
2.
Touch the
Paper Selection
button.
3.
Select the tray that holds the paper that you want to use, and then touch the
OK
button.
Check the image-adjustment settings
Adjust these additional settings to improve copy quality.
1.
From the Home screen on the product control panel, touch the
Copy
button.
2.
Touch the
Image Adjustment
button.
258
Chapter 10 Solve problems
ENWW