HP LaserJet Enterprise MFP M725 series - Manual (Page 37)

Connect the product to a network by using a
network cable and install the software (Mac OS X)
Configure the IP address
1. Make sure the product is turned on and that the Ready message displays on the product control-
panel display.
2. Connect the network cable to the product and to the network.
3. Wait for 60 seconds before continuing. During this time, the network recognizes the product and
assigns an IP address or host name for the product.
4. From the Home screen on the product control panel, touch the Network button to identify the
product IP address or host name.
If the Network button is not visible, you can find the IP address or host name by printing a
configuration page.
a. From the Home screen on the product control panel, scroll to and touch the Administration
button.
b. Open the following menus:
● Reports
● Configuration/Status Pages
● Configuration Page
c. Touch the View button to view the information on the control panel, or touch the Print button
to print the pages.
ENWW Connect the product to a network by using a network cable and install the software (Mac OS X) 23