Step 3: plug in the power, Step: 3 plug in the power – HP Deskjet 832c Printer User Manual
Page 11
Advertising
4
Setting Up Your Printer
1
Step 3: Plug in the Power
1
Lift open the cable access door on the back of the printer.
2
Plug the power adapter’s cord firmly into the connector on the back of the
printer.
3
Plug the appropriate end of the
power cord into the power
adapter.
4
Plug the other end of the power
cord into an electrical outlet.
6410023
Note:
Use only the Power
button on the front of the printer to turn the
printer on and off. Using a power strip, surge protector or a wall outlet switch
to turn the printer on and off may cause premature failure.
C6411-90053_VeniceFixed.book Page 4 Monday, June 28, 1999 11:50 AM
Advertising