HP Deskjet 832c Printer - Manual (Page 15)

8
Setting Up Your Printer 1
Step 5: Load Paper
1 Pull out the lower (IN) tray and
slide the paper-width and
paper-length adjusters out as
far as possible to make room
for the paper.
Flip up the upper (OUT) tray
for a better view of the IN tray.
2 Remove a stack of paper from its packaging. (Make sure all the paper in the
stack is the same size and type.) Tap the stack on a flat surface to even it up.
3 Put the paper into the IN tray, print
side down. You can insert up to
3/8 inch or 10 mm at a time.
4 Push the paper toward the back of
the paper tray until it stops.
6410006
OUT
Tray
IN Tray
Note:
Although you’ll get great print results using plain paper, Hewlett-
Packard papers are developed especially for HP inks and your printer. In
addition, a broad range of printing possibilities opens to you when you use the
various HP papers. HP papers are available at most computer supply stores.
Go to “Customizing Your Print Jobs” on page 34 for more details.
6410007
C6411-90053_VeniceFixed.book Page 8 Monday, June 28, 1999 11:50 AM