HP Deskjet 832c Printer - Manual (Page 55)

48
Creative Printing 3
Printing Banners
We encourage you to use HP Banner Paper for the very best results. When you use
HP Banner Paper, your banners print with brighter colors and denser blacks than if
you use other banner paper. It’s easy to use, too—you don’t have to tear off those
pesky perforated strips! Look for it at a large office supply store.
However, if you use computer or z-fold paper for your banners, we recommend
that you use 20-pound or 75-gsm paper. Always fan the paper before loading it.
Follow your software instructions:
The software program you’re using might require special settings before it
prints banners correctly on your printer. Check the ReadMe file (which was
installed on your computer with the printer software) for information regarding
your specific software program.
1 Select Page Setup from the File menu.
2 From the Paper Size pop-up, select U.S. Letter Banner or A4 Banner paper.
3 Select Print from the File menu.
Choose Paper Type/Quality
from the main pop-up menu, then
select
HP Banner Paper
from the Paper Type pop-up menu.
4 Flip the banner switch up.
The OUT tray lifts slightly,
enabling the printer to pick up
the banner paper.
5 Remove all paper from the IN tray.
Note: You must flip the banner switch to the up position, when printing an
banner paper.
6410040
Banner
Switch
C6411-90053_VeniceFixed.book Page 48 Monday, June 28, 1999 11:50 AM