HP Deskjet 832c Printer - Manual (Page 66)

59
Using and Caring for Your Inkjet Print Cartridges 4
Reinstall the Inkjet Print Cartridges
1 Reinstall the inkjet print cartridges and close the printer’s top cover.
2 Reinsert the power cord into the back of the printer.
3 Print a page.
4 Examine the printout for ink streaking.
Damage Resulting from Refilling the Inkjet Print
Cartridges
To get the best performance from your printer, Hewlett-Packard recommends
using only genuine HP supplies for HP inkjet printers, including genuine factory-
filled HP inkjet print cartridges. Damage resulting from the modification or
refilling of HP inkjet print cartridges is specifically excluded from coverage of HP
printer warranties.
Refilling an HP inkjet print cartridge pushes the electronic and mechanical
components of the inkjet print cartridge past their normal life cycle, creating many
potential problems, such as:
Poor print quality
• Non-HP ink can contain components that cause nozzles to become clogged,
resulting in streaked copy and graying or fuzzy characters.
• Non-HP inks can contain components that corrode the cartridge’s electrical
components, resulting in poor printouts.
Note:
This procedure should remove all fibers that would cause ink to streak
on a printout; however, fibers can be missed. If the printout still shows
streaking, repeat the procedure until the test printout is clear and sharp. This
procedure and additional maintenance tips are located on the World Wide
Web at: http://www.hp.com/support/home_ products
C6411-90053_Cartridges.fm Page 59 Monday, July 12, 1999 10:00 AM