American Fibertek SM9p - Manual (Page 126)

118
 Firmware Version: display the switch’s firmware version.
 Kernel Version: display the kernel software version.
 Hardware version: display the switch hardware version.
 MAC Address: display the unique hardware address assigned by manufacturer
(default).
System Information interface
IP Address
User can configure the IP Settings and DHCP client function, than clicks Apply button.
After reset the IP address, you must reboot the switch.
 DHCP: disable or enable the DHCP client function.
 IP Address: assign the switch IP address. The default IP is 192.168.1.77.
 Subnet Mask: assign the switch IP subnet mask.

Gateway: assign the switch gateway. The default value is 192.168.1.254.

DNS1: Short for Domain Name Server an Internet service that translates domain
name into IP addresses. Because domain name are alphabetic, they're easier to
remember. The Internet is based on IP address . Every time you use a domain
name , therefore, a DNS service must translate the name into the corresponding IP