American Fibertek SM9p - Manual (Page 182)

174
Technical Specifications
This section provides the specifications of switch and the following table lists these
specifications.
Standards
IEEE802.3 10BASE-T
IEEE802.3u 100BASE-TX
IEEE802.3z Gigabit fiber
IEEE802.3ab 1000Base-T
IEEE802.3x Flow control and Back pressure
IEEE802.3ad Port trunk with LACP
IEEE802.1d Spanning tree protocol
IEEE802.1w Rapid spanning tree
IEEE802.1p Class of service
IEEE802.1Q VLAN Tagging
IEEE 802.1x user authentication
Protocol CSMA/CD
LED Indicators
System Power (Green)
1000Base-T Port: Speed (100Mbps Green /
1000Mbps Yellow), Link/Activity (Green),
SFP: Link/Activity (Green)
Connector
1000Base-T: 9 x RJ-45
Gigabit fiber: 2 x SFP socket. The SFP shared with
RJ-45 port 8 and 9.
Switch architecture Store and forward switch architecture. 18Gbps
system backplane. System throughput up to
26.7Mpps.
Packet buffer
1Mbits for packet buffer
RS-232 connector One RS-232 DB-9 Female connector for switch
management
Dimensions 217mm(W) x 140mm(D) x 43mm(H)
MAC Address 8K MAC address table with Auto learning function
Storage Temp. -10℃~70℃, 95% RH