American Fibertek SM9p - Manual (Page 44)

36
function
TFTP Commands Set
Netstar Commands Level Description Defaults Example
backup
flash:backup_cfg
G Save configuration to
TFTP and need to
specify the IP of TFTP
server and the file name
of image.
switch(config)#backup
flash:backup_cfg
restore flash:restore_cfg G Get configuration from
TFTP server and need to
specify the IP of TFTP
server and the file name
of image.
switch(config)#restore
flash:restore_cfg
upgrade
flash:upgrade_fw
G Upgrade firmware by
TFTP and need to
specify the IP of TFTP
server and the file name
of image.
switch(config)#upgrade
flash:upgrade_fw
SystemLog, SMTP and Event Commands Set
Netstar Commands Level Description Example
systemlog ip
[IP address]
G Set System log server
IP address.
switch(config)# systemlog ip
192.168.1.100
systemlog mode
[client|server|both]
G Specified the log mode switch(config)# systemlog mode
both
show systemlog E Displays system log. Switch>show systemlog
show systemlog P Show system log client
& server information
switch#show systemlog
no systemlog G Disable systemlog switch(config)#no systemlog