American Fibertek SM9p - Manual (Page 156)

148
problems, and plan for network growth. Network management systems learn of problems
by receiving traps or change notices from network devices implementing SNMP.
System Configuration
 System Option
Enter the system name, contact, and location information.
1. Name: assign a name for the switch.
2. Contact: Type the name of contact person or organization.
3. Location: Type the location of the switch.
4. Click Apply .
 Community Strings
You can define new community string set and remove unwanted community string.
1. String: fill the name of string.
2. RO: Read only. Enables requests accompanied by this string to display MIB-object
information.
3. RW: Read write. Enables requests accompanied by this string to display MIB-object
information and to set MIB objects.
4. Click Add .
5. To remove the community string, select the community string that you have defined
and click Remove . You cannot remove the default community string set.
 Agent Mode: Select the SNMP version that you want to use it. And then click
Change to switch to the selected SNMP version mode.