EOTech CNVD-T3 Clip-On Night Vision Device - Thermal 3 - Manual (Page 27)

2-9
The unit should be turned off if it is not expected to
be used.
To turn off, press and hold the POWER button for
approximately 3 seconds as the messages OFF? then OFF!
appear sequentially in the eyepiece display. Release the
POWER button when the eyepiece display turns dark.
2.7 BUTTON FUNCTIONS
The CNVD-T3 buttons are multifunctional and produce
different results depending on how they are pressed and
whether or not the Main Menu is displayed.
2.7.1 MENU / ZOOM Button
. The MENU / ZOOM button
has a raised dimple that allows it to be easily identified by
touch.
Pressing the MENU / ZOOM button calls up the Main Menu
(see section 2.13). Pressing the MENU / ZOOM button
twice in rapid succession (double-tapping) toggles between
a 1x and 2x magnified viewed image (see paragraph 2.13.1).
2.7.2 UP / DOWN Buttons
. The UP / DOWN buttons are
used to control the brightness of the display. They are also
used to scroll through menu items when the Main Menu is
displayed. Simultaneously pressing (and holding) the UP
and DOWN buttons will initiate a system reset (see section
2.8).
2.7.3 LEFT / RIGHT Buttons . The LEFT / RIGHT buttons
are used to control the gain settings of the thermal image.
They are also used to scroll through sub-menu options when
displayed.