EOTech CNVD-T3 Clip-On Night Vision Device - Thermal 3 - Manual (Page 46)

2-28
an external hard drive and will normally open a
Windows Explorer dialogue box to display the
contents of the drive.
d. Wait for the LED on the Image Adapter to turn solid
green. Other LED status indicators are described in
Table 2-1.
e. Press the Download Button. This downloads all
images stored in the CNVD-T3’s flash memory,
converts them to .tiff format, and saves them to the
flash memory of the Image Adapter. The LED on
the Image Adapter will flash green during this
process.
NOTE
The Image Adapter creates a separate folder for
each of the devices it has been connected to.
Initiating the download process from the same
device will cause the Adapter to overwrite the
existing folder. Renaming the old folder prior to
downloading new images will preserve the content
of the original folder.
NOTE
The download process does not remove any of the
raw images from the CNVD-T3’s flash memory.
Deleting saved pictures from the CNVD-T3 must
be accomplished as described in section 2.12.7.
f. Wait for the LED on the Image Adapter to return to a
steady green state indicating that the transfer
process is complete. Open or refresh the Windows
Explorer dialogue box to view the contents of the
Image Adapter’s flash memory. Images may then