EOTech CNVD-T3 Clip-On Night Vision Device - Thermal 3 - Manual (Page 40)

2-22
c. Activating the DELETE ALL! sub-menu item
permanently removes all stored pictures from flash
memory and returns the display to normal viewing
mode.
d. Activating the EXIT sub-menu item returns the
display to normal viewing mode.
NOTE
The CNVD-T3 does not “remember” the polarity or
zoom settings in place at the time a picture was
taken. When reviewing stored images through the
eyepiece display, they will appear with polarity and
zoom characteristics currently selected.
2.13.8 Manual Calibration (MCAL) / Automatic Calibration
(ACAL)
. Activating the MCAL / ACAL menu item as shown
below toggles between these two settings. The system
defaults to the MCAL setting when initially powered on.
Figure 2-20 Menu – MCAL / ACAL
Toggle with:
ZOOM 1X
WHOT
CAL
RETINT
RET
PIC
REV
MCAL
RS170
HAND
EXIT