A&D ML-50 - Manual (Page 15)

MS-70 / MX-50 / MF-50 / ML-50 13
4.1. Display and Keys
Name State and Meaning
At gram display Preset time is displayed at timer mode
1 Time
At measurement Analysis time
At gram display Set temperature of sample pan
2 Temperature of
sample pan At measurement Current temperature of sample pan
PROG: Program No. At gram display Program number of measurement program
MEM: Data No. Storing data Data number of data memory function 3
Analysis mode At setting Symbols: 5td, quc, U-a, U-t, U-m
At gram display Sample quantity [g]
4 Value
At measurement Current moisture content [%]
5 Accuracy Accuracy indicator of measurement
6
Operation indicator Indicator of heater cover, sample and drying process
Sample needs at least 0.1 g or more to start measurement.
7 Level indicator
Reference of sample quantity
for standard mode and quick
mode.
Standard mode
Quick mode
Target quantity of sample [g]
Target quantity
At gram
display
Automatic mode Preset termination value [%/min.]
8
Drying rate At measurement Current drying rate [%/min.]
Measurement unit
% MOIST
D D /W /D
Moisture content W - D
is based on W W
% MOIST
D D/W /D
Moisture content (Atro) W - D
is based on D D
% MOIST
D D/W /D
D
W
% MOIST
D D/ W/D
W
D
W: Wet sample mass
D: Dried sample mass
9
g
Heating pattern #1
Standard drying
Maintains a constant
drying temperature.
Ramp drying
Increases the drying
temperature gently.
Step drying
Uses multiple steps of
the drying temperature.
10
Quick drying Quick mode
Lights when heater cover is closed
Blinks during measurement. Disappears when not measuring
Sample mark: Lights when the sample is 0.1 g or more.
Dry content
Ratio
Gram value
x100
x100
x100
x100
7
8
6 5 4
3
2
1
10 #2
9
Proper sample
quantity range
Drying temperature
Drying temperature
Drying temperature
Drying temperature
200°C
approx. 3min.