Example to print selected items, Li5t – A&D ML-50 User Manual
Page 48
46
MS-70 / MX-50 / MF-50 / ML-50
9.1.2. Example To Print Selected Items
This print example is printed multiple measurement data and a suit of items
specified from "analyzer information", "measurement program" or "signature space".
When the title data is the same, it is economical use.
Preparation of Parameters
Device Parameter Description
prt 0 1 When pressing the
ENTER
key, the result is outputted.
prt 1
Data is outputted after measurement automatically.
5-d 0 1
Result is outputted only.
pU5e 1 1
Approx. two seconds interval in each line.
Analyzer
info 2
To print specified item.
AD-8121B MODE 3
Dump print (Received data is printed as it is)
1: Factory settings
How To Print "Analyzer Information" and "Measurement Program"
1. Display the gram unit (of the weighing mode).
2. Press and hold the
ENTER
key.
3. Press
the
SELECT
key to select li5t .
4. Press
the
ENTER
key to print them.
5. Display the gram unit (of the weighing mode).
How To Print "Measurement Data"
Select a parameter to print "Measurement data". Refer to "13. Function Table"
prt 0
When pressing the
ENTER
key, the result is outputted.
prt 1
Data is outputted after measurement automatically.
How To Print "Signature Space"
1. Display the gram unit (of the weighing mode).
2. Press and hold the
ENTER
key.
3. Press
the
SELECT
key to select 5ig .
4. Press
the
ENTER
key to print "signature space".
5. Display the gram unit (of the weighing mode).
0.000
g
li5t
0.000
g
Press and hold
5ig
li5t
Or
0.000
g
5ig
0.000
g
Press and hold
5ig
li5t
Or