A&D ML-50 - Manual (Page 51)

MS-70 / MX-50 / MF-50 / ML-50 49
"Measurement Unit"
Unit A Part of Print Formula Display
Moisture content is based on
wet sample mass
1
W - D
W % MOIST
D /W /D
Moisture content (Atro) is
based on dried sample mass W - D
D
% MOIST
D /W /D
Dry content
D
W
% RATIO
D/W
/D
Ratio 2
W
D
% RATIO
D/ W/D
Gram value - g
W: Wet sample mass D: Dried sample mass
1: Factory settings
2: When result reaches to 999%, measurement is stopped.
"Date"
It is printed date and time of the built-in clock in the analyzer.
Arrangement of the calendar is the same setting of the built-in clock.
Refer to ".5.2 Setting the Clock and Calendar "
If you need to adjust the clock, refer to ".5.2 Setting the Clock and Calendar "
"Remarks Space"
For instance: This space can use for a comment about samples.
"Signature Space"
UNIT ьььь MOIST/ ü W
UNIT ьььь MOIST/ ü D
UNIT üüü RATIO ü D/W
UNIT üüü RATIO ü W/D
UNIT ььььььььььь g
x 100
x 100
x 100
x 100
DATE üü 2003/08/01
TIME ьььь 13:24:57
REMARKS
ь - ь - ь - ь - ь - ь - ь - ь -
SIGNATURE
ь - ь - ь - ь - ь - ь - ь - ь -