ATEN CS-1754 CS-1758 - Manual (Page 22)

Powering Off and Restarting
If it becomes necessary to Power Off one of the Master View units,
before starting it back up you must do the following:
1. Shut down all the computers that are attached to the unit. If there are
Master View stations cascaded down from it, all the cascaded
stations and the computers attached to them must be shut down, as
well.
Note: 1. You must unplug the power cords of any computers that
have the Keyboard Power On function that are connected to the
shut down switches. Otherwise, the switches will still receive power
from the computers.
2. If the unit is operating under external power, unplug the
power adapter cable.
2. Wait 10 seconds, then plug the stations back in, starting with the
lowest stations in the chain and working back to the station you
originally shut down.
3. After all the Master View’s are up, power On the computers, starting
with the ones attached to the lowest stations in the chain and working
back to the station you originally shut down.
2003-11-14
16 CS-1754 / CS-1758 User Manual