ATEN CS-1754 CS-1758 - Manual (Page 28)

Hotkey Configuration
Alternate Hotkey Invocation Keys:
An alternate set of Hotkey Invocation keys is provided in case the
default set conflicts with programs running on the computers.
To switch to the alternate Hotkey Invocation set, do the following:
1. Invoke HKM (see p. 19)
2. Press and release the H key
The Hotkey Invocation keys become the Ctrl key (instead of Num Lock)
and the F12 key (instead of Minus).
Note: This procedure is a toggle between the two methods. To revert
back to the original [Num Lock] [Minus] method, invoke HKM,
then press and release the H key again.
Alternate OSD Invocation Keys
The OSD activation method can be changed from tapping the Scroll
Lock key twice to tapping the Ctrl key twice ([Ctrl] [Ctrl]). To change the
OSD Invocation method, do the following:
1. Invoke HKM (see p. 19)
2. Press and release the T key
Note: 1. This procedure is a toggle between the two methods. To
revert back to the original [Scroll Lock] [Scroll Lock] method,
invoke HKM, then press and release the T key again.
2. For Mac systems we recommend using [Ctrl] [Ctrl] as the
OSD invocation keys since Scroll Lock is used to emulate F14
in PC to Mac keyboard emulation (see p. 27).
2003-11-14
22 CS-1754 / CS-1758 User Manual