ATEN CS-1754 CS-1758 - Manual (Page 29)

Platform / Language Setup:
The CS-1754 / CS-1758’s default port settings are for a PC Compatible
operating platform, and the US English keyboard language code. You
can modify these for each port by bringing the KVM focus to the port
you want to change and using the hotkey combinations shown in the
table below.
The Hotkey entry method is as follows:
1. Invoke HKM (see p. 19)
2. Press and release the appropriate Function key (see table).
After completing a setting, you automatically exit HKM.
Key Operation
[F1] Sets the PC Compatible keyboard operating platform for the port that
currently has the KVM focus.
[F2] Sets the Mac keyboard operating platform for the port that currently
has the KVM focus.
[F3] Sets the Sun keyboard operating platform for the port that currently
has the KVM focus.
[R] [Enter] Resets the KVM settings back to their defaults.
Note: The brackets indicate the keys you should press. Simply press
the indicated keys - do not type the brackets.
2003-11-14
CS-1754 / CS-1758 User Manual 23